0.4mm Nozzle for FlashForge Creator3v2 (2020 model)
Genuine FlashForge standard nozzle for the updated Creator3. WARNING Requires teflon tube that is included and is approx 42mm long and inserts in top half More
Our toughest Raise3D nozzle for printing with abrasive materials such as Carbon Fibre, Tungsten and Boron Carbide.
Fits Pro 2, Pro3 and E2 models. Not suitable for the E2-CF More
0.4mm Nozzle for FlashForge All Metal Hot Ends - FFam
When the FlashForge Guider2S switched over to a high-temperature hot end, it came with a different nozzle and barrel/heatbreak (with red nozzle duct) More
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread, but has a larger and 0.6mm hole, which it sometimes used for faster printing and with metal and PETG filaments. Total Length 13mm
More
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating More
0.4mm Toughened Nozzle for FlashForge All Metal Hot Ends - FFam
When the FlashForge Guider2S switched over to a high-temperature hot end, it came with a different nozzle and barrel/heatbreak (with red nozzle duct) More
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating More
0.8mm Nozzle for FlashForge Creator3v2 (2020 model)
Genuine FlashForge replacement nozzle for the updated Creator3. WARNING Requires teflon tube that is included and is approx 42mm long and inserts in top half More
Our toughest Raise3D nozzle for printing with abrasive materials such as Carbon Fibre, Tungsten and Boron Carbide.
Fits Pro 2, Pro3 and E2 models. Not suitable for the E2-CF More
Our toughest Raise3D nozzle for printing with abrasive materials such as Carbon Fibre, Tungsten and Boron Carbide.
Fits Pro 2, Pro3 and E2 models. Not suitable for the E2-CF More
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating More
Hardened 0.6mm Nozzle for FlashForge Creator3v2 (2020 model)
Genuine FlashForge replacement nozzle for the updated Creator3. WARNING Requires teflon tube that is included and is approx 42mm long and inserts in top half
Note: Steel Nozzle shown in photo More
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
0.3mm Brass Nozzle for FlashForge HighTemp Hot Ends - FFam
When the FlashForge Guider2S switched over to a high-temperature hot end, it came with a different nozzle with a longer thread and barrel/heatbreak (with red nozzle duct) More
0.6mm Brass Nozzle for FlashForge All Metal Hot Ends - FFam
When the FlashForge Guider2S switched over to a high-temperature hot end, it came with a different nozzle and barrel/heatbreak (with red nozzle duct) More
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating More
TwinClad Coated 0.4mm nozzle for Zortrax M200 + UP Plus 2 printers
This nozzle from US firm MicroSwiss fits Zortrax M22, Afinia and UP! style printers, it is made from a 360 brass base material and plated with TwinClad XT coating.
This Genuine Raise3D nozzle is made form Silicon Carbide, for very high toughness.
At this stage we only know it fits the E2+CF model, though it may suit others, this is unknown More
This Genuine Raise3D nozzle is made form Silicon Carbide, for very high toughness.
At this stage we only know it fits the E2+CF model, though it may suit others, this is unknown More
This Genuine Raise3D nozzle is made form Silicon Carbide, for very high toughness.
At this stage we only know it fits the E2+CF model, though it may suit others, this is unknown More
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
More
This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
More
Sydney - Alexandria, NSW
Perth - Belmont, WA
3D Printers
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs