This amazing filament is made from a mix of wood particles and bio-polymers, which can be used in your 3D printer to produce items that look like wood...best of all we have made it flexible enough to come on a spool, yet stronger so it does not snap like other brands More
Polymaker PC-Max™ offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max™ an excellent choice for real-world, engineering applications. More
This Bilby3D filament is blend of 30% copper and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface
More
This Bilby3D filament is blend of 10% Aluminium and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface More
This Bilby3D filament is blend of 10% Aluminium and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface More
PLA Blend Filament - Magnetic Iron - 1.75mm - 125g Coil
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle. More
This PVA (Poly Vinyl Alcohol) is water soluble and comes on a 500g spool (approx 140m), a more handy size for experimentation, and is for 1.75mm extrusion. We have had is manufactured to be easier to use and dissolve than the Makerbot brand PVA. We have tested it on Makerbot 3D printers. More
PLA Filament - 1.75mm - Brass - 200g Spool- until sold out
This Bilby3D filament is blend of 10% Brass and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface More
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
More
This amazing filament is made from a mix of wood particles and bio-polymers, which can be used in your 3D printer to produce items that look like wood...best of all we have made it flexible enough to come on a spool, yet stronger so it does not snap like other brands.
After printing it also smells like wood and can be sanded and painted in the same way as wood. More
This amazing filament is made from a mix of wood particles and bio-polymers, which can be used in your 3D printer to produce items that look like wood...best of all we have made it flexible enough to come on a spool, yet stronger so it does not snap like other brands.
After printing it also smells like wood and can be sanded and painted in the same way as wood. More
This amazing filament is made from a mix of wood particles and bio-polymers, which can be used in your 3D printer to produce items that look like wood...best of all we have made it flexible enough to come on a spool, yet stronger so it does not snap like other brands.
After printing it also smells like wood and can be sanded and painted in the same way as wood. More
PolyCast is a filament designed to produce investment patterns for investment casting applications. 3D printing significantly cuts down both the cost and lead time by eliminating the tooling process. More
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread, but has a larger and 0.6mm hole, which it sometimes used for faster printing and with metal and PETG filaments. Total Length 13mm
More
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility. More
Now available!
PolySmooth is a PVB filament with very little shrinkage (thus low warping) and is the first filament that dissolves in Alcohol - So it is smoothable with Ethanol and Iospropyl Alcohol
3D Printing evolved: Stronger & more durable for beautiful, functional prints with engineering-grade performance!
Not your everyday PLA, HTPLA v3 offers the ease of PLA printing with such exceptional quality, compatibility, reliability, durability, performance, and finish that youll want to use it every day! More
PLA Filament - 1.75mm - GLOW IN THE DARK (GREEN) - 1kg Spool-Until sold out
This Bilby3D PLA filament GLOWS IN THE DARK1 It is a green/white in light and glows with a bright green light in the dark. Charges under UV light (in the sun or under a UV torch).
This filament has been extensively tested and works well with standard PLA settings.
More
Now available!
PolySmooth is a PVB filament with very little shrinkage (thus low warping) and is the first filament that dissolves in Alcohol - So it is smoothable with Ethanol and Iospropyl Alcohol
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
PLA Filament - 1.75mm - GLOW IN THE DARK (BLUE) - 1kg Spool
This Bilby3D PLA filament GLOWS IN THE DARK! It is a mid-deep blue in light and glows with a blue light in the dark. Charges under UV light (in the sun or under a UV torch).
New formula means this glows nearly 3-4 times brighter than our older Glow! The head in the photo remains glowing well past 4am each night More
PLA Blend Filament - Magnetic Iron - 1.75mm - 500g Spool
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle. More
Polymaker PC-Max&tm; offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max&tm; an excellent choice for real-world, engineering applications. More
This Bilby3D filament is blend of 10% Aluminium and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface. More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
3D Printing evolved: Stronger & more durable for beautiful, functional prints with engineering-grade performance!
Not your everyday PLA, HTPLA v3 offers the ease of PLA printing with such exceptional quality, compatibility, reliability, durability, performance, and finish that youll want to use it every day! More
Sometimes you want a professional matte finish and sometimes you just want some shine! Take gloss to another level with Glitter Flake HTPLA. Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out. Celebrate good times with ornaments, disco balls, toys, and treasures. If you want to make a print more fun, just add glitter. More
HIPS (limonene soluble) Filament - 1.75mm - 1 kg spool
HIPS (High Impact Polystrene) Filament is designed to dissolvable easily in a limonene bath in just 8-24 hours (depending on size and geometry of print). Limonene is a common, colorless, citrus-scented solvent available online and in grocery/home stores. (available from us - search Dissolve Away) More
Dissolve Away dissolves HIPS filament with no effect on ABS. Making HIPS perfect for support material on dual extruding 3D Printers like the Raise3D Pro2, FlashForge Inventor, Creator and Makerbot Replicator 2X. More
This Bilby3D filament is blend of 20% Bronze and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface More
The innovative new Polymaker Polysher smoothing machine that changes how we see 3D Printed parts. The Polysher has an airtight design that creates an aerosol of isopropyl alcohol / ethanol which melts the surface of printed parts leaving behind a smooth surface.
More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
This Bilby3D filament is blend of 20% Bronze and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 °C, on your regular build surface More
Please Note: this is a filament sample only, so does not come on a coil
Make your prints POP with sparkly Glitter Flake!
Sometimes you want a professional matte finish and sometimes you just want some shine! Take gloss to another level with Glitter Flake HTPLA. Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out. Celebrate good times with ornaments, disco balls, toys, and treasures. If you want to make a print more fun, just add glitter. More
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
ASA 3D Filament is an impact modified resin composed of acrylonitrile, styrene and acrylic rubber. ASA filament is resistant to UV, making it suitable to 3D printing outdoor use parts. More
Have you ever wanted to create something with your 3D printer that includes electronics? Maybe an LED, touch sensor, or some other genius invention to solve the worlds problems? Then Proto-pasta Conductive PLA is the perfect material for you! Prints at standard PLA settings on a non-heated bed.
PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat and no need to work with dangerous organic solvents. More
Now available!
PolySmooth is a PVB filament with very little shrinkage (thus low warping) and is the first filament that dissolves in Alcohol - So it is smoothable with Ethanol and Iospropyl Alcohol
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
Real Metal PLA Blend - 1.75mm - Copper Filament - 750g Spool
This amazing ColorFabb filament is a blend of 80% fine Copper particles and PLA and prints on standard desktop 3D Printers at PLA settings. It is very brittle in the filament state and seems like it would not be strong, but when you print and the melted PLA bonds and blends with the copper it becomes very strong. More
CoPolyester (Natural) High Strength Food Grade Filament - 750g Spool
This unique filament is high strength and very tough. With high Tg (around 75°C) for improved temperautre resistance.
With no dyes at all, this material is almost transparent More
This PVA (Poly Vinyl Alcohol) is water soluble and comes on a 500g spool (approx 140m), a more handy size for experimentation, and is for 3mm extrusion. We have had is manufactured to be easier to use and dissolve than the Makerbot brand PVA. We have tested it on Makerbot 3D printers.
You can just swap the filament from your extruder, and load in the PVA filament as normal, then build objects just like you would with ABS or PLA- just change the extrusion temp to 185-195 degrees
We have experimented and tested it and produced a fact sheet with some cool dissolving Octopus photos - check it out http://www.bilby3d.com.au/BilbyCNCPVAFactSheet.pdf OR check out the dissolving octopus here:Dissolving Octopus NOTE PVA works well with a cold bed and PLA as the model. It does not pair well with ABS as ABS will not stick to PVA and vise versa More
HIPS (limonene soluble) Filament - 3mm - White - 1 kg spool
HIPS (High Impact Polystrene) Filament is designed to dissolvable easily in a limonene bath in just 8-24 hours (depending on size and geometry of print). Limonene is a common, colorless, citrus-scented solvent available online and in grocery/home stores. (available from us - search Dissolve Away) More
Have you ever wanted to create something with your 3D printer that includes electronics? Maybe an LED, touch sensor, or some other genius invention to solve the worlds problems? Then Proto-pasta Conductive PLA is the perfect material for you! Prints at standard PLA settings on a non-heated bed. More
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
Polymaker PC-Max&tm; offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max&tm; an excellent choice for real-world, engineering applications. More
This Bilby3D filament is blend of 30% copper and PLA (yes it is a metal filament).
It is easy to print with - just use normal PLA settings, at 190-240 deg c, on your regular build surface.
Comes off the bed shiny (unlike other copper filaments that require hours of post work).
It will darken and eventually develop some patina over time.
Now available!
PolySmooth is a PVB filament with very little shrinkage (thus low warping) and is the first filament that dissolves in Alcohol - So it is smoothable with Ethanol and Iospropyl Alcohol
Now available!
PolySmooth is a PVB filament with very little shrinkage (thus low warping) and is the first filament that dissolves in Alcohol - So it is smoothable with Ethanol and Iospropyl Alcohol
Now available!
PolySmooth is a PVB filament with very little shrinkage (thus low warping) and is the first filament that dissolves in Alcohol - So it is smoothable with Ethanol and Iospropyl Alcohol
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
Polymaker PC-Max&tm; offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max&tm; an excellent choice for real-world, engineering applications. More
Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. The plant-based fibers improve adhesion of glues and coatings. Similar to Carbon Fiber HTPLA, Matte Fiber does NOT require a wear resistant nozzle. More
New to metal finishing? Heres some help getting started!
Interested in Proto-pasta Stainless Steel PLA, but need help polishing? Explore polishing flat surfaces with polishing paper or curved surfaces with your bench grinder, drill, or rotary tool. More
This unique filament is high strength and very tough. With high Tg (around 75°C) for improved temperautre resistance.
With no dyes at all, this material is almost transparent More
Polymaker PC-Max&tm; offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max&tm; an excellent choice for real-world, engineering applications. More
Polymaker PC-Max™ offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max™ an excellent choice for real-world, engineering applications. More
ASA 3D Filament is an impact modified resin composed of acrylonitrile, styrene and acrylic rubber. ASA filament is resistant to UV, making it suitable to 3D printing outdoor use parts. More
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
This amazing filament is a blend of PLA and Carbon Fiber by ProtoPasta in the USA.
It prints easily at 230-245 degrees on a cold bed. We used glue stick on a glass bed for our test. More
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
Processing is comparable to standard PLA (extrudes at 190-240C). No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines. More
This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. It prints easily at 230-245 degrees on a cold bed. We used glue on a glass bed for our test. Tendancy to leave small balls/pimples on surface which easily clean up. Will wear nozzle so we advise using a wear resistant nozzle (sold seperately). Produces impressively strong models with minimum fuss and difficulty. More
This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. It prints easily at 230-245 degrees on a cold bed. We used glue on a glass bed for our test. Tendancy to leave small balls/pimples on surface which easily clean up. Will wear nozzle so we advise using a wear resistant nozzle (sold seperately). Produces impressively strong models with minimum fuss and difficulty. More
This amazing ColorFabb filament is a blend of 80% fine Copper particles and PLA and prints on standard desktop 3D Printers at PLA settings. It is very brittle in the filament state and seems like it would not be strong, but when you print and the melted PLA bonds and blends with the copper it becomes very strong. More
The material is still in beta, which means colorfabb are still working on the formulation to get the best possible performance. It is a high metal content abbrassive filament that polishes up to be a metal print with a lovely golden shine it shows when polished to perfection.
More
The material is still in beta, which means colorfabb are still working on the formulation to get the best possible performance. It is a high metal content abbrassive filament that polishes up to be a metal print with a lovely golden shine it shows when polished to perfection.
More
Not your everyday PLA, HTPLA v3 offers the ease of PLA printing with such exceptional quality, compatibility, reliability, durability, performance, and finish that youll want to use it every day! Proto-pastas Premium HTPLA v3 is their own unique formulation based on extensive in-house testing and our industry-leading experience working with heat treatable PLA. HTPLA v3 prints like standard PLA, but can be heat treated for much higher temperature stability than standard PLA. HTPLA v3 offers exceptional performance and finish for your functional prototypes and final part production. More
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
More
Sydney - Alexandria, NSW
Melbourne - Clayton, VIC
3D Printing
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
3D Printer Filament
3D Scanners
Parts and Spares
Tools & Jigs