With a right angled handle and a blade that is very thin at the front edge, this is a great tool for getting those really well stuck prints off the bed! More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes (like Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes (like Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer. More
Bulk Pack Blue Tape Precut Sheet - 15x15cm - Pack of 25 sheets
This is a 25 sheet pack of our die cut self adhesive Blue tape designed to fit a 15 X 15cm bed, like the XYZ Jnr, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 15 X 15cm. The backing peels off for easy adhesion. More
This PEI (Ultem) Sheet comes complete with a sheet of 3M 468MP Adhesive to fix it to your bed
It is extra thick (0.8mm) to take full advantage of PEIs durability and long life
Size 214 x 214mm
Single Sheet More
25x Bulk Pack Blue Tape Precut Sheet - 25x19cm - Replicator 5th Gen
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit the Makerbot Replicator5th Gen 25 x 19cm bed, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 25 x 19cm. The backing peels off for easy adhesion. More
25x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion. More
100x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 100 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion. More
BuildTak FlexiPlate System for Raise N2 + Pro2 Series
BuildTak is proud to announce the latest addition to their line of 3D printing accessories – the BuildTak FlexPlate System!
As a company dedicated to making the 3D printing experience as easy as possible, this three-part system was developed specifically to eliminate the hassle of print removal More
This precut sheet of textured tape is 285x165mm to fit a Makerbot Replicator2 print bed. The texture means that your printout locks on to the bed much more strongly than using masking tape More
50x Bulk Pack Blue Tape Precut Sheet (10x10cm) - Replicator 5th Gen Mini
This is a 50 sheet pack of our die cut self adhesive Blue tape is designed to fit the small printers of 10 x 10cm bed, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 10 x 10cm. The backing peels off for easy adhesion. More
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than older tapes (such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer than the delicate old tapes. More
This precut sheet of textured tape is 250x250mm to fit a Prusa up to a Printrbot PLUS v2.1 print bed. Slice 5cm of one edge for a Makerbot Replicator 5th Gen. If printing small items, you could cut into 4 pieces and just use it in the center of the bed. The texture means that your printout locks on to the bed much more strongly than using masking tape More
This precut sheet of textured tape is ~ 110 x 110mm with cutouts for the metal sensing points (required for bed levelling). The texture means that your printout locks on to the bed much more strongly than using masking tape More
This die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 X 16cm. The backing peals off for easy adhesion. Price is per sheet (also available in bulk packs)
We manufacture this tape to have a strong adhesive and be better for PLA adhesion than painters tape, or Makerbot blue tape sheets More
3D printing Tape (Blue Edgelock) - 48mm wide x 50m long
This blue painters (masking) tape is widely accepted as the standard for covering your bed for printing with PLA.
One roll will completely re-cover a Replicator bed over 50 times, or a prusa bed over 43 times.
Genuine 3M Edge-Lock tape More
This Polyimide (also known as Kapton) Tape is great for covering your build platform or providing electrical insultation. ABS stick to this when hot (with a heated bed), but releases easily when cold. More
This Polyimide (also known as Kapton) Tape is extra wide (100mm), great for covering your build platform when printing with ABS. The roll is approx 33m long and kapton is approx 0.02mm think More
Glass Bed Upgrade for Flashforge Dreamer, CreatorPro2016 (NOT Inventor 1)
This cool upgrade kit gives your Dreamer, Creator Pro 5 (2016 Model) a lift out Glass bed, which will be super flat, and also safer and easier to remove prints from. (there is a different kit for the inventor 1). NOTE new machines have 12mm screws in corners and need 4 X 20mm counter head M3 screws- ask for them on order if needed More
Inventor / CreatorPro Blue Print Bed Tape, 23x15cm
This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1 and Creator Pro 2016 (v5) printing bed.
It is very similar to BuildTak but with more texture on the surface
This is a genuine FlashForge replacement sheet for the FlashForge Guider2 printing bed.
It is similar to BuildTak, but with more surface texture, and can be cut down with scissors or a knife and used on other machines with a differently sized bed More
This is a genuine FlashForge replacement part for the FlashForge Finder
It clips in and out of the plastic holder which slides in and out of the machine to remove prints More
This is a genuine FlashForge replacement part for the FlashForge Inventor 2 S/SE
It clips in and out of the plastic holder which slides in and out of the machine to remove prints More
Glass Bed in borosilicate glass 5mm thick 232x154mm
A lift out Glass bed, which will be super flat, and also safer and easier to remove prints from. It is 232 x 154mm and 5mm thick in heat resistent glass with polished edges for safety.
No brackets, this is just the glass plate. This is the size for Flashforge Dreamer, Pro and Inventor1 that comes in Glass Bed kit More
Sydney - Alexandria, NSW
Melbourne - Clayton, VIC
3D Printing
3D Printer Filament
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
3D Scanners
Parts and Spares
Tools & Jigs