nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
Real Metal PLA Blend - 1.75mm - Copper Filament - 750g Spool
This amazing ColorFabb filament is a blend of 80% fine Copper particles and PLA and prints on standard desktop 3D Printers at PLA settings. It is very brittle in the filament state and seems like it would not be strong, but when you print and the melted PLA bonds and blends with the copper it becomes very strong. More
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
ColorFabs first special filament based on the Amphora 3D polymer. Reinforced with 20% specially sourced carbon fibers, this filament is perfect for parts which need high stiffness. XT-CF20 has a beautiful matte surface finish when printed. More
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
This unique filament is high strength and very tough. With high Tg (around 75°C) for improved temperautre resistance.
With no dyes at all, this material is almost transparent More
nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It is rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it is possible to influence how flexible a part should feel after printing.
nGen_FLEX is processed at 240C/260C on most 3D printers. More
PHA-PLA Blend Filament - 1.75 mm - Chocolate Brown - 750g Spool
PHA (polyhydroxyalkanoate), is blended with PLA to form a unique, tougher low warping and less brittle PLA 3d printing filament. PHA is like PLA a bio-polyester, so this filament is still 100% biodegradeable.
Made by ColorFabb so you can be sure that this filament is of the highest possible quality. More
CoPolyester (Natural) High Strength Food Grade Filament - 750g Spool
This unique filament is high strength and very tough. With high Tg (around 75°C) for improved temperautre resistance.
With no dyes at all, this material is almost transparent More
This amazing ColorFabb filament is a blend of 80% fine Copper particles and PLA and prints on standard desktop 3D Printers at PLA settings. It is very brittle in the filament state and seems like it would not be strong, but when you print and the melted PLA bonds and blends with the copper it becomes very strong. More
The material is still in beta, which means colorfabb are still working on the formulation to get the best possible performance. It is a high metal content abbrassive filament that polishes up to be a metal print with a lovely golden shine it shows when polished to perfection.
More
The material is still in beta, which means colorfabb are still working on the formulation to get the best possible performance. It is a high metal content abbrassive filament that polishes up to be a metal print with a lovely golden shine it shows when polished to perfection.
More
Sydney - Alexandria, NSW
Melbourne - Clayton, VIC
3D Printing
3D Printer Filament
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
3D Scanners
Parts and Spares
Tools & Jigs