MakerJuice Standard Resin - Ivory (Off White) - 500ml
New Product Note: Standard resin has replaced MakerJuice G+, and should be used in places where G+ was used previously.
Standard is our go-to resin for all general purpose prints. Extremely fast curing enables it to work with printers such as the ANYCUBIC Photon, Wanhao D7, SparkMaker, etc. With lower viscosity than most resins on the market, its easier to cleanup. This new, improved formula also has much more stable pigments, meaning no stirring during printing! More
New Product Note: Standard resin has replaced MakerJuice G+, and should be used in places where G+ was used previously.
Standard is our go-to resin for all general purpose prints. Extremely fast curing enables it to work with printers such as the ANYCUBIC Photon, Wanhao D7, SparkMaker, etc. With lower viscosity than most resins on the market, its easier to cleanup. This new, improved formula also has much more stable pigments, meaning no stirring during printing! More
SF is a great blend that provides slightly more bend than G+, while maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts. More
New Product Note: Standard resin has replaced MakerJuice G+, and should be used in places where G+ was used previously.
Standard is our go-to resin for all general purpose prints. Extremely fast curing enables it to work with printers such as the ANYCUBIC Photon, Wanhao D7, SparkMaker, etc. With lower viscosity than most resins on the market, its easier to cleanup. This new, improved formula also has much more stable pigments, meaning no stirring during printing! More
New Product Note: Standard resin has replaced MakerJuice G+, and should be used in places where G+ was used previously.
Standard is our go-to resin for all general purpose prints. Extremely fast curing enables it to work with printers such as the ANYCUBIC Photon, Wanhao D7, SparkMaker, etc. With lower viscosity than most resins on the market, its easier to cleanup. This new, improved formula also has much more stable pigments, meaning no stirring during printing! More
New Product Note: Standard resin has replaced MakerJuice G+, and should be used in places where G+ was used previously.
Standard is our go-to resin for all general purpose prints. Extremely fast curing enables it to work with printers such as the ANYCUBIC Photon, Wanhao D7, SparkMaker, etc. With lower viscosity than most resins on the market, its easier to cleanup. This new, improved formula also has much more stable pigments, meaning no stirring during printing! More
New Product Note: Standard resin has replaced MakerJuice G+, and should be used in places where G+ was used previously.
Standard is our go-to resin for all general purpose prints. Extremely fast curing enables it to work with printers such as the ANYCUBIC Photon, Wanhao D7, SparkMaker, etc. With lower viscosity than most resins on the market, its easier to cleanup. This new, improved formula also has much more stable pigments, meaning no stirring during printing! More
SF is a great blend that provides slightly more bend than G+, while maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts. More
SF is a great blend that provides slightly more bend than G+, while maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts. More
A general purpose red resin. Genuine B9 Creations brand.
- Suitable for lost wax casting applications
- Pigmented for 75-100 micron layer thickness
- May be primed and painted
- Printed parts may be used to create vulcanized rubber molds
If you bought this directly from the US it would cost $87 + $132.50 Freight = US$219.50
With a conversion rate of 1.1 > AU$ 241.45 More
MakerJuice Resin SubG+ - Red - 500ml - UNTIL SOLD OUT
Red pigmented SubG+ Resin in a 500ml / 526g bottle
This formula is designed as a general purpose resin for high resolution and low shrinkage. It is extremely hard, easily sanded and painted, and great for all sorts of prints.
We have tested this resin with the MakeX and Form1 with standard settings. It is high viscosity, so it is suitable for the B9s moving tray. More
MakerJuice Resin SubG+ - Yellow - 500ml - UNTIL SOLD OUT
Yellow pigmented SubG+ Resin in a 500ml / 526g bottle
This formula is designed as a general purpose resin for high resolution and low shrinkage. It is extremely hard, easily sanded and painted, and great for all sorts of prints.
We have tested this resin with the MakeX and Form1 with standard settings. It is high viscosity, so it is suitable for the B9s moving tray. More
MakerJuice Resin SubG+ - Blue - 500ml - UNTIL SOLD OUT
Blue pigmented SubG+ Resin in a 500ml / 526g bottle
This formula is designed as a general purpose resin for high resolution and low shrinkage. It is extremely hard, easily sanded and painted, and great for all sorts of prints.
We have tested this resin with the MakeX and Form1 with standard settings. It is high viscosity, so it is suitable for the B9s moving tray. More
MakerJuice Resin SubG+ - Green - 500ml - UNTIL SOLD OUT
Green pigmented SubG+ Resin in a 500ml / 526g bottle
This formula is designed as a general purpose resin for high resolution and low shrinkage. It is extremely hard, easily sanded and painted, and great for all sorts of prints.
We have tested this resin with the MakeX and Form1 with standard settings. It is high viscosity, so it is suitable for the B9s moving tray. More
SF is a great blend that provides slightly more bend than G+, while maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts. More
SF is a great blend that provides slightly more bend than G+, while maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts. More
Ultracur3D® ST 45, Ultracur3D® ST 45 M, Ultracur3D® ST 45 B by Forward AM are reactive urethane photopolymers for Tough applications that delivers an excellent combination of high strength, plus long-term toughness and impact resistance.
It is very well suited for 3D printing high performance functional parts requiring high accuracy and mechanical strength. It ensures very fast printing and outstanding surface finishing, and is available as fully colorless (clear) and black. More
Ultracur3D® ST 45, Ultracur3D® ST 45 M, Ultracur3D® ST 45 B by Forward AM are reactive urethane photopolymers for Tough applications that delivers an excellent combination of high strength, plus long-term toughness and impact resistance.
It is very well suited for 3D printing high performance functional parts requiring high accuracy and mechanical strength. It ensures very fast printing and outstanding surface finishing, and is available as fully colorless (clear) and black. More
Ultracur3D® ST 45, Ultracur3D® ST 45 M, Ultracur3D® ST 45 B by Forward AM are reactive urethane photopolymers for Tough applications that delivers an excellent combination of high strength, plus long-term toughness and impact resistance.
It is very well suited for 3D printing high performance functional parts requiring high accuracy and mechanical strength. It ensures very fast printing and outstanding surface finishing, and is available as fully colorless (clear) and black. More
Ultracur3D® ST 80 is new to the Forward AM Tough line of reactive urethane photopolymers. It is an impressively cost-effective allrounder that delivers high toughness, impact resistance, and long-term stability of 3D printed parts at a very attractive price. More
The Rigid Ultracur3D® RG reactive urethane photopolymers have the highest Flexural Modulus of our Ultracur3D® range and the highest heat stability. They are specifically engineered to deliver class-leading tensile strength and rigidity, as well as high print accuracy with low shrinkage, and to ensuring the long-term UV stability of printed parts.
Ultracur3D® RG prints have low water uptake and are easy to polish, accelerating design iterations and lowering your development costs. More
Ultracur3D® FL 60 by Forward AM is a well-balanced reactive urethane photopolymer for Flexible applications that delivers exceptional flexibility with high tear strength. It provides high softness (Shore 73A) and excellent haptics, while maintaining long-term color stability without yellowing. More
BASF Ultracur3D EL 150 Flexible Resin - Natural - 1kg
Ultracur3D® EL 150 by Forward AM is a very versatile reactive urethane photopolymer for highly Elastic applications that delivers medium softness (Shore 78A). It provides an optimal combination of high torsional strength, good elongation at break, and long-term rebound. More
This is the MakerJuice blend of SF made for the Form 1+/2 printers. All prints using any of the colors we sell for the Form 1+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in Open Mode. More
This is the MakerJuice blend of SF made for the Form 1+/2 printers. All prints using any of the colors we sell for the Form 1+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in Open Mode. More
This is the MakerJuice blend of SF made for the Form 1+/2 printers. All prints using any of the colors we sell for the Form 1+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in Open Mode. More
This is the MakerJuice blend of SF made for the Form 1+/2 printers. All prints using any of the colors we sell for the Form 1+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in Open Mode. More
MakerJuice SF Resin for Form 1+/2 - Yellow - 500ml
This is the MakerJuice blend of SF made for the Form 1+/2 printers. All prints using any of the colors we sell for the Form 1+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in Open Mode. More