Menu
Bilby 3D
Your Account
Cart
Cart
Your Account
Account
Shop Locations
Shops
Services
Services
Bilby 3D
- Experts in 3D
X Close

General Enquiries:

Phone: Freecall 1800-847-333
Fax: +61 2 8079 5971

Sydney - Alexandria, NSW

Unit 23, "The Bourke Centre"
Set Your Store

110 Bourke Road
Ph: 02 8197 3928

Brisbane - Spring Hill, QLD

Shop 2, 474 Upper Edward Street
Set Your Store
Ph: 07 3135 9810

Melbourne, VIC

Coming Soon
Ph: 03 8080 1200

Head Office - Bega NSW

452 Wyndham Lane, Kanoona. Ph: 02 8197 3930

Click above to set your Store
X Close

Log In to your Account

Forgot Password?

Login




Once logged in, you can view your previous orders and tracking details
and save time at checkout by not having to enter your details again

New to Bilby3D?


Extruder Parts
Extruder Parts
Parts for the construction of Plastic Extruding Toolheads

Related Sub-Categories: 3D Printer Hot Ends and Extruders | Nozzles | Motors | Fans |
i
ptTapeCeramicFF

Select Store for Stock Levels
$2.95

Pre-Cut Ceramic tape with Kapton

Suits the Creator Pro, Dreamer, Guider and Finder machines as well as a wealth of others.
More
i
ptKitMK10TC

Select Store for Stock Levels
$60.00

All Metal Hotend kit for MK10 extruders

This is an all metal hotend upgrade for MK10 style extruders by Micro Swiss.
MK10 Extruders most notibly used on the FlashForge Dreamer and Pro 2016 and Dremel Idea Builder
More
i
ptTapeCeramic

Select Store for Stock Levels
$2.50

Ceramic Insulation Tape

This 1 inch wide ceramic tape is used to wrap your heater block and reduce heat transfer to both the extruder and your work piece. Fix by wrapping in kapton tape.
The tape on your Makerbot, MBot3D or Reprap will need replacing from time to time, especially when a print fails and the melted plastic gets caught up in the print head - it can sometimes stick to the ceramic tape and rip it on removal - careful not to pull on the temperature sensor wire!
More
i
ptNozzle04Std2

Select Store for Stock Levels
$12.50

Nozzle, 0.4mm hole

This is the most common nozzle across all 3D Printers. Most notably Makerbot Replicator 1, 2 and 2x, Prusa, older FlashForge
More
i
ptTubeFit4xM6

Select Store for Stock Levels
$4.50

Push-in hose fitting for 4mm tube, M6 Thread

These metal fittings are used for holding pneumatic (compressed air) tube. Designed for tube with a 4mm diameter made of Nylon or PU (PolyUrethane), they also work better than anything else we have found with PTFE tubing, which is very hard to hold due to its low friction. Has plastic collar - push down to release.
These are great for bowden tube style extruders, or anywhere else you need to hold a filament feeder tube securely. The thread on this item is compatible with the Bulldog Extruders and Hexagon Hot Ends
Specifications:
Suitable for: Filament feeder tubes, air or vacuum hoses
Working Pressure: 0-150psi
Outer Thread: M6 x 1.0mm
Thread Length: 4.5mm
Overall Length: 20mm
Spanner Size: 10mm across flats
More
i

Stainless Steel Barrel (aka thermal barrier or Heat core)

Stainless Steel Barrel machines, and Makerbot Replicator 1 and 2 (not the 2X). Connects the heater block to the extruder mounting block.
More
i
ptNozzle04MK10TC

Select Store for Stock Levels
$33.50

0.4mm Nozzle for All Metal MK10 Hotend Kit

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
More
i
ptThermoFFsh

Select Store for Stock Levels
$14.95

FlashForge Thermocoupler - Short

Genuine FlashForge thermocoupler
M4 brass fitting at sensing end (Note: our other thermocouplers and heater blocks are all M3)
Crimped terminals at motherboard end
~11cm lead length - Suited to the FlashForge Dreamer which has a terminal board on the extruder carriage
More
i
ptHeatBlockM3D

Select Store for Stock Levels
$9.45

Heater Block for RepRap, MBot, Replicator 1 and 2 Printers

Aluminium Heater Block 20x20x10mm &plusminus;1mm.

More
i
ptFilDrive11str

Select Store for Stock Levels
$6.95

Brass Filament Drive Gear - Straight Cut

These straight cut gears have the advantage over a hobbed gear in that the profile of the teeth is much deeper - so they dont get clogged as quickly - they get a better grip on the filament for longer.
More
i
ptHeatCartFF

Select Store for Stock Levels
$9.95

Heater Cartridge for FlashForge 3D Printers

Genuine Spare part for FlashForge Dreamer and Creator Pro2016 heater cartridge.
Note : Flashforge Creater Pro cable is different (see image 3, PtHeatCart4024)
More
i
ptHotEndHex175

Select Store for Stock Levels
$72.95

Hexagon Hot End Set for 1.75mm Filament

This complete hotend kit from RepRap discount includes; nozzle, heater block, barrel/heat barrier, fined heat sink, heater cartridge, thermistor, fan, mount and more in a plastic case
More
i
ptThermCable2

Select Store for Stock Levels
$6.95

Thermistor - NTC 100K with 1m cable

Thermistor Cable for measuring the temperature of Hot ends and heated beds on Reprap, Prusa i3 and similar
More
i
ptNozzleUPv3

Select Store for Stock Levels
$29.99

Genuine UP Brand Nozzle - 0.4mm - V3

This is a genuine V3 replacement nozzle for the UP! 3D Printers (UP Plus, UP Mini and the Up Box manufactured after March 2015). See specifications for full details

Not compatable with: Makerbot or Mbot 3D printers.
More
i
ptThermoFF

Select Store for Stock Levels
$14.95

FlashForge Thermocoupler for Creator Pro

Genuine FlashForge thermocoupler
100cm lead length - Suited to the Creator Pro and earlier
More
i
ptHeatGrease

Select Store for Stock Levels
$0.20

Heat Conductive Paste - 0.5g Satchet

Thermal grease to increase the conduction of heat from chip to heatsink or heat resistor to heater block to thermistor.
Thermal Conductivity > 1.8W/m-k
White, non-toxic, tasteless, non-corrosive.
More
i

Mini Fan - 25x25x7mm - 12V DC

These small fans are often used to cool 3D Printer Hot Ends, especially on bowdon tube and rostock designs.
- 12V DC, 0.08A
- Connector PH2.0-2P (2mm pitch, 2 pin)
- 9 Blades
- Noise 26 dBa
- Sleeve Bearing
- 11,000 rpm
- 2.2 CFM Airflow

More
i
ptHeatGrease1g

Select Store for Stock Levels
$0.50

Heat Paste 1g Halnziye Syringe

Halnziye heat conductive paste in a 1g syringe
More
i
ptNozzle02Std

Select Store for Stock Levels
$10.95

0.2mm Nozzle (standard width)

Experimental Nozzle for Repraps where the heater block has in internal M6 thread.
Specs : Hole 0.2mm. Length: 13mm Thread M6, 5mm long. Head width 7mm
More
i
ptHSink40x40ext

Select Store for Stock Levels
$6.85

40 x 40mm Heat Sink, drilled for extruder cooling

This heatsink (40x 40 x 11mm high) is designed to fit on the back of a Nema 17 stepper motor, or the front of a Nema 17 based extruder as found on the Makerbot Replicator Series or MBot Cube.
Mounting Holes are 3.2mm diameter, 31mm apart. The center hole is aprox 12mm diameter
More
i
ptHeatBlock16

Select Store for Stock Levels
$5.95

Heater Block - Aluminium Mini Size

This mini Heater block has a variety of pre-drilled and tapped holes for your layout. Anodised Aluminium with chamfered edges. Quality look!

More
i
ptNozzleUP

Select Store for Stock Levels
$29.99

Genuine UP Brand Nozzle - 0.4mm

This is a genuine V2 replacement nozzle for the UP! Designed to fit UP and UP Mini Printers released prior to Mid 2015. Up, Up minis and the Up Box require V3

More
i
ptNozzle02MK10TC

Select Store for Stock Levels
$33.50

0.2mm Nozzle for All Metal MK10 Hotend Kit

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
More
i
ptNozzle06TC

Select Store for Stock Levels
$29.95

0.6mm Nozzle - M6 thread and Wear Resistant TwinClad coating

This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread, but has a larger and 0.6mm hole, which it sometimes used for faster printing and with metal and PETG filaments. Total Length 13mm
More
i
ptHotEndJMetal

Select Store for Stock Levels
$34.00

Hot End: All Metal J-Head for 1.75mm Filament

This hot end is a new type of all metal J-Head.
More
i
ptNozzle06MK10TC

Select Store for Stock Levels
$33.50

0.6mm Nozzle for All Metal MK10 Hotend Kit

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
More
i
ptNozzle03MK10TC

Select Store for Stock Levels
$33.50

0.3mm Nozzle for All Metal MK10 Hotend Kit

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube.
More
i
ptBarrelSSptfe

Select Store for Stock Levels
$4.95

Stainless Steel barrel with PTFE (teflon) core

This stainless steel barrel has continuous thread so it is more universal than our standard barrel. It also has been drilled out larger at one end and a piece of teflon (PTFE) tube inserted to reduce the chances of "barrel lock" which can stop filament feeding resulting in a failed print and otherwise only solved with the oily rag trick (see our support articles)
More
i

M8 Hobbed Bolt - For Extruders

This bolt is used within some extruders to drive the filament. 50mm long.
Comes with 4 washers and an M8 Nylock nut.
More
i
ptNozzle02Wd

Select Store for Stock Levels
$12.95

0.2mm (wide) Nozzle for 3D Printers

Note: Pictures are for the 0.3mm nozzle, otherwise the same.
Extra wide nozzle for Ultimakers/Repraps where the heater block has in internal M6 thread.

More
i
ptNozzle04Wd

Select Store for Stock Levels
$12.95

0.4mm (wide) Nozzle for 3D Printers

Wide brass nozzle with 0.4mm hole Note: Pictures are for the 0.3mm nozzle, otherwise the same.

More
i
ptHotEndHex3

Select Store for Stock Levels
$68.95

Hexagon Hot End Set for 3mm filament

This complete hotend kit from RepRap discount includes; nozzle, heater block, barrel/heat barrier, fined heat sink, heater cartridge, thermistor, fan, mount and more in a plastic case
More
i
ptNozzle05Wd

Select Store for Stock Levels
$12.95

0.5mm (wide) Nozzle for 3D Printers

Experimental extra wide brass nozzle for Repraps where the heater block has in internal M6 thread.
Note: Pictures are for the 0.3mm nozzle, otherwise the same.

More
i
ptNozzle04TC3

Select Store for Stock Levels
$29.95

0.4mm Nozzle - M6 Thread, Twin Clad Coating, 3mm Filament

This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.

More
i
ptNozzle03hex175

Select Store for Stock Levels
$19.95

0.3mm Nozzle for Hexagon Hotend

This is a replacement nozzle for the Hexagon Hot-End
More
i
ptExtrBPSv2

Select Store for Stock Levels
$170.00

Bills Extruder - v2 (Australian made)

This 3D Printer extruder is entirely Australian designed and made and designed to mount to most Nema 17 motors. Its simple and compact design provides reduce clogging through precision engineered Aluminium; and zero gap feeding (perfect for flexible filaments
More
i
ptNozzle05hex3TC

Select Store for Stock Levels
$29.95

0.5mm Nozzle - M6 Thread, Twin Clad Coating, 3mm Filament

This is LulzBot / Hexagon hotend style nozzle. With M6 thread for 3mm Filament or PTFE Tube
More
ptBarrelE3Dv6175

Select Store for Stock Levels
$4.95

Barrel for E3D v6 Hot End

This is a replacement part for the E3D v6 clone hotend
More
i
ptHeatRes68

Select Store for Stock Levels
$1.50

Heat Resistor 6.8 Ohm

This 6.8 Ohm heat resistor provides a heat source for your hot end, or other application
Wirewound
Rating: 120V, 2.6W. 3W at 25 degC
Temp Coefficient: +-75ppm/degC
Operating Rage: -55 to 350 degC
Tolerance +-5%
Case Size: 5.5mm dia, 12mm long Axial Leads
More
i
ptNozzle03Wd

Select Store for Stock Levels
$9.50

0.3mm (wide) Nozzle for 3D Printers

Extra wide nozzle for Ultimaker/Repraps where the heater block has in internal M6 thread.

More
i
ptMountBlockWi3

Special Order
$34.95

Extruder Mounting Block for Wanhao i3 and Clones

This is redesigned cooling block for Wanhao i3
More
i
ptNozzle05hex175

Select Store for Stock Levels
$19.95

0.5mm Nozzle for Hexagon Hotend

This is a replacement nozzle for the Hexagon Hot-End
0.5mm Nozzle Hole, 1.75mm entry
M6 Thread, length 5mm

More
i
ptBarrelUlt6x20

Select Store for Stock Levels
$8.95

Brass Barrel for Ultimaker Printers

This is an aftermarket brass barrel for Ultimaker 3D Printers . It has the unique feature of a hex partway down the barrel to allow tightening without straining on other parts

More
i
ptNozzleUPv3TC

Select Store for Stock Levels
$36.99

UP Nozzle with Twin Clad Coating - 0.4mm - V3

This Nozzle for UP Mini 2, UP Box and UP Box Plus 3D printers with internal M6 thread.

This aftermarket version by Micro-Swis has a hard-wearing non-stick TwinClad coating
More
i
ptLeverWD6

Special Order
$38.95

Machined Lever for Wanhao Duplicator 6

This is a replacement lever for Wanhao Duplicator 6. Lever is CNC machined from 6061 billet aluminum, with weight reduction features. To match extruder color, this lever is anodized with matte black anodizing
More
i
ptLeverWi3

Special Order
$36.95

Machined Lever for Wanhao i3 and Clones

This is a replacement lever for Wanhao i3 and all of its clones. The Lever Arm is CNC machined from 6061 billet aluminum, with weight reduction features
More
ptR2XExtUp

Select Store for Stock Levels
$64.50

Replicator 2X - Extruder Upgrade Kit (injection moulded)

This Makerbot Brand injection moulded upgrade is designed to fit the Makerbnot Replicator 2X twin extuder. It includes the left and right extruder feeder mechanism upgraded to a constant presure lever arm much more reliable than the grub screw adjustment variety fitted as standard. IT DOES NOT FIT the Ply wood original Repliactor.
More
i

Polyimide (Kapton) Tape - 6mm wide - 33m long

This Polyimide (also known as Kapton) Tape is a high temperature insulative tape. It uses a silicon based adhesive to withstand high temperatures up to 260 C. It creates a great surface for your build platform - helping to keep your print from moving during printing, but releasing when the item cools. It is great around your extruder head where things get over 210 C. It can also be used as a general purpose electrical tape. It is anti-static and designed to leave no adhesive residue. The roll is approx 33m long and kapton is approx 0.02mm thick
More
i

Polyimide - 20mm wide - 30m long

Polyimide / Kapton Tape, 20mm wide.
The roll is approx 30m long and kapton is approx 0.02mm think
More
i
ptNozzle04TC7

Select Store for Stock Levels
$29.95

0.4mm Nozzle - M7 thread and Wear Resistant Twin Clad Coating

This This wear resistant nozzle by AVN/Micro Swiss suits a range of printers has an M7 thread and 0.4mm hole.

More
ptBarrelFFG

Select Store for Stock Levels
$16.95

Barrel for Flashforge Guider / Finder

Threaded metal tube that runs between the heater block and the circular heatsink in the extruder
More
i
ptNozzle04FF

Select Store for Stock Levels
$14.95

Genuine FlashForge Nozzle - 0.4mm hole

This is a genuine nozzle from FlashForge. M7 tread.
More
i
ptThermRad1

Select Store for Stock Levels
$2.95

Thermistor, 100K NTC type, Radial Leads

Use this for sensing the temperature of your hot end, heated bed or whatever you can think of
Specs:
100kOhm
Tolerance +-10%
Beta Value(K) 4036K
Operating Temperature: -60 to 300 degC
Bead Dia 2.13mm length 4.5mm
Lead Length 67mm
More
i

Thermistor, 100K NTC, Axial Leads

Use this for sensing the temperature of your hot end, heated bed or whatever you can think of
More
i
ptPEEKisolator

Select Store for Stock Levels
$12.56

PEEK isolator for Ultimaker

PEEK nylon thermal isolator with M6 internal thread
More
i
ptNozzle06TC7

Select Store for Stock Levels
$29.95

0.6mm Nozzle - M7 thread and Wear Resistant TwinClad Coating

This wear resistant nozzle by AVN/Micro Swiss suits a range of printers with an M7 thread and 0.6mm hole
More
i
ptBarrel3xM6

Select Store for Stock Levels
$8.95

Brass Barrel for 3mm Filament, M6x40mm long

Building a hot end? You need to choose a barrel to go between the hot end and the extruder motor. This one has a hole to suit 3mm filament, we also have a 1.75mm version.
More
i
ptBearing608Z

Select Store for Stock Levels
$0.95

Ball Bearing - 608Z - used for many parts of a Reprap

These bearings have an inner diameter of 8mm, Outer Diameter of 22mm and Width of 7mm - with metal dust covers. They are a standard size for many things, including roller blades, scooters and roller skates
More
i

Brass Nozzle (internal thread) - 0.3mm hole

0.3mm Nozzle with internal M6 thread.

More
i

Brass Nozzle for Hot End - 0.5mm hole

0.5 Nozzle with internal M6 thread.

More
i
ptNozzle02TC7

Select Store for Stock Levels
$29.95

0.2mm Nozzle - M7 thread and Wear Resistant Twin Clad Coating

This This wear resistant nozzle by AVN/Micro Swiss suits a range of printers has an M7 thread and 0.2mm hole.

More
i
ptNozzle04TC

Select Store for Stock Levels
$29.95

0.4mm Nozzle - M6 thread and Wear Resistant Twin Clad coating

This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
More
ptTubeFeed500

Special Order
$9.95

Filament Feeder Tube, 500mm

Genuine FlashForge Feeder Tube for the Guider, but will also fit a number of other machines and models
More


Related Sub-Categories:

Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550