Nozzle Clearing Tool
This hand held tool is a safer way to clear blockages in your nozzle
Modifi3D - 3D Finishing Tool
MODIFI3D is a heated tool with interchangeable tips designed to finish, repair and modify 3D printed parts. MODIFI3D Is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints.
Nozzle Cleaning Spring
CURRENTLY UNAVAILABLE: Due to lack of availability, we have developed our own product: tlNozzleClear. Earliest ETA on this tool is 8/8/2016
These handy little spring wires are the best way we have found yet to unclog a nozzle while it is still in position on the machine - just be careful that filament does not drip down on your fingers when the blockage clears!
Set of 3 Brushes - Steel, Copper, Nylon
Set of 3 plastic handled brushes
With a right angled handle and a blade that is very thin at the front edge, this is a great tool for getting those really well stuck prints off the bed!
Side Cutter - 110mm
Precision Sidecutters for cutting wire, leads etc.
Plastic turntable with feet - 6 inch
This plastic turntable is good for holding a spool of filament, regardless of size and width. It measures 150mm across and is fitted with 6 bump-on rubber feet on each side to reduce the change of things moving around.
Straight Tweezers - Budget
These stainless steel tweezers are 120mm long with a straight tip. Great for picking off dags from your printer nozzle or picking up very small objects.
L Type Spanner - 9mm
This quality chrome vanadium steel spanner is perfect for undoing the nozzle on your 3D printer. Distance Across the flats, 9mm
Curved Tweezers - Budget
These stainless steel tweezers are 120mm long with a 45degree angle tip. Great for picking up very small objects, or moving those SMD around.
Ultra Violet Torch - LED
This torch is great for making your glow in the dark filament light up really bright (in the dark).
Requires 3 AAA Batteries (not supplied)
Ceramic Flathead Screwdriver
This is what you need to adjusting those fiddly little pots on driver boards
Needle Nosed Pliers
130mm long needle nosed pliers.
Modifi3D Replacement Tips
Replacement Tips for the Modifi3D Finishing Tool
L Type Spanner - 8mm
This quality chrome vanadium steel spanner is perfect for undoing the nozzle on your 3D printer. Distance across flats: 8mm
L Type Spanner - 10mm
This quality chrome vanadium steel spanner is perfect for undoing the nozzle on your 3D printer. Distance Across the flats, 10mm
Proto-Pasta Polishing Starter Kit
New to metal finishing? Heres some help getting started!
Interested in Proto-pasta Stainless Steel PLA, but need help polishing? Explore polishing flat surfaces with polishing paper or curved surfaces with your bench grinder, drill, or rotary tool.
L Type Spanner - 7mm
This quality chrome vanadium steel spanner is perfect for undoing the nozzle on your 3D printer. Distance Across the flats, 7mm
Plastic Scraper with soft edge
This plastic scraper is ideal for smoothing tape onto your priter bed, and helping to remove prints and waste from your bed. One edge is sharp, the other has a soft fabric glued on (similar to loop velcro)
See also the related Sub-Category Measurement and Testing