CURRENTLY UNAVAILABLE: Due to lack of availability, we have developed our own product: tlNozzleClear. Earliest ETA on this tool is 8/8/2016
These handy little spring wires are the best way we have found yet to unclog a nozzle while it is still in position on the machine - just be careful that filament does not drip down on your fingers when the blockage clears!
This is a genuine XYZ Printing Part, supplied with the Da Vinci range of Printers.This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
Set of 3 Brushes - Steel, Copper, Nylon
Set of 3 plastic handled brushes
Buy Now
Nozzle Clearing Tool
This hand held tool is a safer way to clear blockages in your nozzle
Buy Now
Buildtak Spatula
With a right angled handle and a blade that is very thin at the front edge, this is a great tool for getting those really well stuck prints off the bed!
Buy Now
Straight Tweezers - Budget
These stainless steel tweezers are 120mm long with a straight tip. Great for picking off dags from your printer nozzle or picking up very small objects.
Buy Now
0.4mm Nozzle - M6 Thread, Twin Clad Coating, 3mm Filament
This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
Buy Now
Printrbot Nozzle 0.4mm (for their metal hot ends)
This nozzle is for the Printrbot Metal hot ends and has a 0.4mm tip hole.
Buy Now
TwinClad Coated 0.4mm nozzle for Zortrax M200 + UP Plus 2 printers
This nozzle from US firm MicroSwiss fits Zortrax M22, Afinia and UP! style printers, it is made from a 360 brass base material and plated with TwinClad XT coating.
Buy Now
Genuine UP Brand Nozzle - 0.4mm (5mm)
This is a genuine V2 replacement nozzle for the UP! Designed to fit UP and UP Mini Printers released prior to Mid 2015. Up, Up minis and the Up Box require V3
Buy Now
Genuine UP Brand Nozzle - 0.4mm - V3+ (8mm)
This is a genuine V3 replacement nozzle for the UP! 3D Printers (UP Plus, UP Mini and the Up Box manufactured after March 2015). See specifications for full details
Not compatable with: Makerbot or Mbot 3D printers.
Buy Now
Genuine FlashForge Nozzle - 0.4mm hole
This is a genuine nozzle from FlashForge. M7 tread.
Buy Now
Nozzle, 0.4mm hole
This is the most common nozzle across all 3D Printers. Most notably Makerbot Replicator 1, 2 and 2x, Prusa, older FlashForge
Sydney - Alexandria, NSW
Melbourne - Clayton, VIC
3D Printing
3D Printer Filament
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
3D Scanners
Parts and Spares
Tools & Jigs