T5 pitch belt, order by the meter (it will come as a continues lenghth up to 50 meters).
Specs at a glance:
Width : 5mm
Tooth Height : 2mm
Pitch : 5mm (centre rise to centre rise)
Our belt is Polyurethane, reinforced with braded wire, so it is flexible but strong. It wont stretch or snap easily.
A Prusa needs a bit less than 2m, an original Mendel 3m
Timing Pulley - T5 pitch, 10 teeth, Twin Flange
This Timing Pulley has 10 teeth. it is made of Aluminium with a set screw for attachment. Bore diameter is 5mm. It has 2 flanges (dia 20mm) suiting a belt width up to 6mm. Overall length is 17mm.
Timing Pulley - T5 pitch, 10 teeth, Single Flange
This Timing Pulley has 10 teeth. It is made of Aluminium with two set screw holes for attachment (one set screw provided. Bore diameter is 5mm. It has 1 flange (dia 21mm) suits a belt width of 8mm. Overall length is 8mm, hub diameter is 11mm.
Prusa Belt Set (T5)
5mm wide T5 timing belt to drive the X and Y axis of a Prusa Mendel or similar applications.
Belt comes as 2 x 1000mm length. COLOUR IS NOW WHITE polyurethane with steel reinforcing.
You can also order belt by the meter to whatever length you want.
Belt Set for Mendel, T5 pitch
5mm wide T5 timing belt to drive the X, Y and Z axis of an Original Mendel or similar applications.
Belt comes as: 1380mm for X axis, 840mm for Y axis and a 990mm continuous (loop) belt for the Z axis
You can also buy T5 belt by the meter, choose your length.
Timing Pulley - T2.5 pitch, 16 teeth, Twin Flange
Timing Pulley, T2.5 pitch, 16 teeth, Twin Flange to suit belt up to 6mm
M8 Mudguard Washers, 25mm - set of 6
Set of 6 mudguard washers with 8.5mm inner hole, and 25mm outer diameter. A2 Stainless Steel, 1.5m thick. These are used as timing belt guides on Mendels, Prusas and other Repraps.