These glass beds make a rugged printing surface. Some people swear by printing directly on to glass with glue stick, but we prefer the results we get when used in conjuction with blue or Kapton (polyimide) tapes.
Now MADE IN SYDNEY
Borosilicate glass is better than normal window (float) glass in that it can better withstand sudden changes in temperature without breaking. This is especially important when using a heated bed with ABS, but also a good idea when using PLA alone.
200x212mm is a great size for sitting on top of our heated bed boards, using bulldog clips or similar to hold if while printing, then remove the clips to remove the print while not on the machine. It is 3mm thick.
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Heated Bed PCB - Version 2B - 214 x 214mm - 12 or 24V
This heated bed is needed to print ABS reliably. It works very well surfaced with Kapton (Polyamide) Tape, sticking when hot, but releasing your printed object once cooled. This is also needed for PLA when covering your bed with Kapton
Aluminium Bed for RepRaps, 220x200x2mm
Aluminium Bed with Pre-Drilled holes.
Polyimide (Kapton) Tape - 200mm wide - 33m long
This Polyimide (also known as Kapton) Tape is extra wide (200mm)
The roll is approx 33m long and kapton is approx 0.02mm think
Polyimide (Kapton) Tape - 50mm wide - 33m long
This Polyimide (also known as Kapton) Tape is great for covering your build platform or providing electrical insultation. ABS stick to this when hot (with a heated bed), but releases easily when cold.
Ceramic Bed Insulation
Ceramic Tape Cut to a square of 200x200mm, around 2mm thick
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: A5/2 Westall Rd, Clayton, VIC 3168
Bega Head Office: 452 Wyndham Lane, Kanoona 2550