Raise 3D have gone back to the drawing board to design a smaller format 3D printer, with a focus on educational as well as industrial use.

It has great new features:
- Industry first onscreen videos and nozzle offset calibration
- Updated 7inch tablet interface with Power saving button
- All new mechanical systems
- Magnetic Flex Bed, for easy print removal
- IDEX - independent dual extruders
Mirror Mode: Produce 3D models and their inverse simultaneously, increasing productivity and reducing print time
Duplication Mode: Use both extruders in synchronised printing, doubling production capabilities

- Power loss recovery
- Filament runout sensors
- Remote video monitoring (and Print Farm management via Raise Cloud)
- HEPA + Carbon Air Filtration

While Raise3D advise this machine can print carbon fibre, Bilby 3D do not. We find that an upgrade is required to the nozzle and drive gear, and are looking at an easy fit upgrade to be sold as a kit soon We have tested TPE 85a - Prints perfectly

Next >

- Machine Size: Width 600mm, Depth 600mm, Height 471mm counter to top + handle = ~490mm.
- Operating Space: The side doors open, and the top lid raises for maintenance. Total operating space is W 1060mm D 690mm H896mm
- Build Volume (Single Extruder Print): 330 x 240 x 240mm (WxDxH)
- Build Volume (Dual Extruder Print): 295 x 240 x 240mm (WxDxH)
- Print Head Travel Speed: 30 - 150mm/s
- Layer Heights: 0.02 - 0.25mm
- Maximum Exstrusion Temperature: 300 °C
- Filament Diameter: 1.75mm
- Raise V3 Hotend
Note: This machine uses the same nozzles as the Raise Pro 2/Pro 2 Plus, so you can upgrade to a toughened nozzle
- Print Bed: Heated with BuildTak on magnetic flexible steel bed
- Maximum Bed Temperature: 110 °C
- Bed Levelling: Mesh-Levelling with Flatness Detection
- XY Step Size: 0.78125 microns
- Z Step Size: 0.078125 microns
- Filament runout sensors
- Connectivity: Wi-Fi 2.4/5g, LAN, USB port, Live Camera
- Filter: HEPA with activated Charcoal
- Machine Size: 607 x 596 x 465mm (WxDxH)
- Power Input: 100-240V AC, 50/60Hz, 230V @ 2A
- Power Supply Output: 24V DC, 350W

Software

- Provided Software: ideaMaker (Free dowload)
- Supported File Types: STL / OBJ / 3MF
- Machine code type: GCODE

Print Controller

- Interface: 7-inch Touchscreen
- Netwrok: Wi-Fi, Ethernet
- Resume Print after Power Outage: Firmware recording, no need for battery installation
- Screen Resolution: 1024 x 600 pixels
- Motion Controller: Atmel ARM Cortex-M4 120MHz FPU
- Login Controller: NXP ARM Cortex-A9 Quad 1GHz
- Memory: 1 GB
- Onboard Flash: 8 Gb
- OS: Embedded Linux
- Ports: USB 2.0 x 2 (1 x Host), Enthernet x 1

Dimensions: 607 x 596 x 490mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 5 or more machines at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.