This power supply is designed to work with our heavy duty CNC kit parts.
Input: 110V/6.5A or 220V/4A selected by switch
Output: 60V 5.85A - 3 pairs of screw terminals
Has Over-Voltage and Over-Temperature protections
Adjustable voltage for fine tuning +-5V
Internal Fan switches on automatically with temperature
Indicator LED shows operation
The DM860A is a type of two-phase hybrid stepping motor driver for one motor. The drive voltage is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current.
Inputs and Outputs are opto-isolated.
Overvoltage, under voltage, overcorrect, phase short circuit protection
14 channels subdivision and automatic idle-current reduction. 8 channels output phase current setting
Holding torque when the DM860A is run under high speed is also significantly higher than other two-phase drivers, what’s more, the positioning accuracy is also higher.
It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Replaces the older MD882 Driver
Stepper Motor - Nema 34
Nema 34 motor with 4 wires and a holding torque of 1150N.cm
Length 150mm, 86x86mm face, 69.6mm between the holes
Shaft Diameter is 14mm, 13mm across flats
Step angle is 1.8 degrees, rated current 3.5A per phase, phase resistance 1.8 Ohms and Inductance 21mH
Breakout Board with DB25 Male Connector
Board for breaking out the pins on a parallel port cable
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550