Prices + Stock updated 11 Jan @ 13:16
HIPS (limonene soluble) Filament - 1.75mm - 1 kg spool
HIPS (High Impact Polystrene) Filament is designed to dissolvable easily in a limonene bath in just 8-24 hours (depending on size and geometry of print). Limonene is a common, colorless, citrus-scented solvent available online and in grocery/home stores. (available from us - search Dissolve Away)
Features
Specs
Support
Our HIPS filament can be extruded at 200-260 degrees C making it easy to print using normal ABS settings on the UP and Makerbot printers.
HIPS is compatiple with ABS for dual extrusion (ie HIPS and ABS bond during printing) allowing for HIPS support and RAFT printing on ABS models, for easy dissolving away after printing.
Please note, HIPS requires a heated build plate and PLA will not stick to it. For dual extruding with PLA see PVA support material
Next
More Information
Dimensions: 200 x 200 x 65
Next
This product is in the categories:
Related Products:
Buy Now
Dissolve Away (700ml) (D-limonene)- dissolves HIPS filament
Dissolve Away dissolves HIPS filament with no effect on ABS. Making HIPS perfect for support material on dual extruding 3D Printers like the Raise3D Pro2, FlashForge Inventor, Creator and Makerbot Replicator 2X.
Buy Now
PVA (Poly Vinyl Alcohol) water soluble - 1.75mm Filament - 500g Spool
This PVA (Poly Vinyl Alcohol) is water soluble and comes on a 500g spool (approx 140m), a more handy size for experimentation, and is for 1.75mm extrusion. We have had is manufactured to be easier to use and dissolve than the Makerbot brand PVA. We have tested it on Makerbot 3D printers.
Buy Now
HIPS (limonene soluble) Filament - 3mm - White - 1 kg spool
HIPS (High Impact Polystrene) Filament is designed to dissolvable easily in a limonene bath in just 8-24 hours (depending on size and geometry of print). Limonene is a common, colorless, citrus-scented solvent available online and in grocery/home stores. (available from us - search Dissolve Away)
Buy Now
PVA (Poly Vinyl Alcohol) water soluble Filament - 2.85mm - 500g Spool
This PVA (Poly Vinyl Alcohol) is water soluble and comes on a 500g spool (approx 140m), a more handy size for experimentation, and is for 3mm extrusion. We have had is manufactured to be easier to use and dissolve than the Makerbot brand PVA. We have tested it on Makerbot 3D printers.
You can just swap the filament from your extruder, and load in the PVA filament as normal, then build objects just like you would with ABS or PLA- just change the extrusion temp to 185-195 degrees
We have experimented and tested it and produced a fact sheet with some cool dissolving Octopus photos - check it out
http://www.bilby3d.com.au/BilbyCNCPVAFactSheet.pdf OR check out the dissolving octopus here:
Dissolving Octopus
NOTE PVA works well with a cold bed and PLA as the model. It does not pair well with ABS as ABS will not stick to PVA and vise versa
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2019 Bilby3D Pty. Ltd.
Sydney - Alexandria, NSW
3D Printing
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
3D Printer Filament
3D Scanners
Parts and Spares
Tools & Jigs