PHA-PLA Blend Filament - 1.75 mm - Chocolate Brown - 750g Spool
PHA (polyhydroxyalkanoate), is blended with PLA to form a unique, tougher low warping and less brittle PLA 3d printing filament. PHA is like PLA a bio-polyester, so this filament is still 100% biodegradeable.
Made by ColorFabb so you can be sure that this filament is of the highest possible quality.
TIP! PLA/PHA has very minimal warping tendencies, however if your printing parts which take up the maximum of you buildspace you might see some warping. If it is very important that your part is perfectly flat than we suggest to turn down the fan that is cooling your part. This allows the material to slowly get rid of heat without warping. After a few centimeters you can turn on the cooling if the part needs it.
Laser measured during production and is guaranteed to be 1.75mm +/- 0.05mm
Extrusion Temperature : 195-220 degC
Print Speed: 40-100mm/s
Heated Bed: (not strictly necessary 50-60 degC
Build platform/surface: blue tape on a cold bed. Glass, or aluminium heated beds with glue-stick
Dimensions: 200 x 200 x 59mm
Packaging: Airtight double sealed foil in a cardboard box.
Tested on: Makerbot Replicator 2; Ultimaker Original, Dual and 2; Delta Tower, Felix, Leapfrog, BeeTheFirst, and others
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550