Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 1kg Spool Details and Specifications

X Close

General Enquiries:

Phone: Freecall 1800-847-333
Fax: +61 2 8079 5971

Sydney - Alexandria, NSW
More

Unit 23, "The Bourke Centre"

Set Your Store

110 Bourke Road
Ph: 02 8197 3928

Brisbane - Spring Hill, QLD
More

Shop 2, 474 Upper Edward Street

Set Your Store

Ph: 07 3135 9810

Melbourne - Clayton, VIC

Factory A5, 2 Westall Rd, Clayton

Set Your Store

Ph: 03 8080 1200

Head Office - Bega NSW

452 Wyndham Lane, Kanoona. Ph: 02 8197 3930

Click above to set your Store

Bilby 3D Services

Bilby 3D Technical Support 3D Printer Repair

3D Printer Service and Repair 3D Printer Repair

Courses and Training

X Close

3D Printer Filament

...More

----------- Branded Filament --------------

Matter & Form Scanner V2

Matter and Form V2 Scanner + QuickScan Software

$1399.00

X Close

3D Scanners

Wear Resistant Nozzles

Last longer (especially for abrasive filament types) AND increase print quality

X Close

Parts and Spares

----- Machine Specific Spares -------

Stainless Digital Caliper

$26

X Close

Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and PVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).

Key features

Eexceptionally low processing (linear) shrinkage of 0.1 %
High temperature and abrasion resistance
Easy separation of the object from the bed
High mechanical strength
Chemical resistance to lubricants and oils
Wide range of applications
Very robust lamination of layers
High creep resistance, high hardness and rigidity of the printed items
Very wide temperature range for prolonged operation as well as a very high temperature up to 180°C for short-time operation

Applications

Production of gear wheels and racks, sweep-off gears and guide rolls operated in elevated temperatures up to 150°C on a prolonged basis and up to 180°C on a short-time basis

All types of ring and plate seals with an increased chemical and corrosion resistance

End-use parts

Tooling

Functional prototyping

Industrial modelling

Next >

- Heat Deflection Temperature: 240 °C
- Density: 1.25 g/cm3
- Nozzle temperature: 235-260°C
- Bed temperature: 80-100°C
- Printing speed: 30-80 mm/s

Due to the essential content of shredded carbon fibre, it is recommended to use nozzles with diameters exceeding the standard value of 0.4mm.

The presence of carbon fibre may also cause the wear of brass nozzle, thus it is recommended to use stainless steel nozzles for prolonged application of PA6 CF15.

Dimensions: 200 x 200 x 52

Next >

General Enquiries:

Sydney - Alexandria, NSW
More

Brisbane - Spring Hill, QLD
More