Heater Block for RepRap, MBot, Replicator 1 and 2 Printers
Aluminium Heater Block 20x20x10mm &plusminus;1mm.
This block is compatible with the Makerbot Replicator 1 (Ply wood models) and Replicator 2 and 2X machines, however it does NOT fit the Makerbot standard 6.3mm diameter heater cartidge (though it can easliy be drilled out slightly larger to take it), and the heater cartiridge grub screw will need to be fitted pointing up instead of down (as in the genuine heater block).
Can also be used with our M6 barrels and M6 nozzles with an internal thread.
- M3 hole for thermistor or thermocoupler, now with side hole for helping to hold glass-bead type thermistors.
- M6 threaded barrel/nozzle fitting hole
- 6mm main hole for a metric heater cartridge with grub screw
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This is the most common nozzle across all 3D Printers. Most notably Makerbot Replicator 1, 2 and 2x, Prusa, older FlashForge
Heater Cartridge - 40W 24V
This ceramic core heater cartridge has a variety of heating possibilities from hot ends/ extruders to heated beds.
Stainless Steel Barrel (aka thermal barrier or Heat core)
Stainless Steel Barrel machines, and Makerbot Replicator 1 and 2 (not the 2X). Connects the heater block to the extruder mounting block.
Pre-Cut Ceramic tape with Kapton
Suits the Creator Pro, Dreamer, Guider and Finder machines as well as a wealth of others.
Ceramic Insulation Tape
This 1 inch wide ceramic tape is used to wrap your heater block and reduce heat transfer to both the extruder and your work piece. Fix by wrapping in kapton tape.
The tape on your Makerbot, MBot3D or Reprap will need replacing from time to time, especially when a print fails and the melted plastic gets caught up in the print head - it can sometimes stick to the ceramic tape and rip it on removal - careful not to pull on the temperature sensor wire!
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550