The rollers contain roller bearings (608) for low and consistant friction, but is designed to still provide some resistance so your spool does not unravel. This can then cause one loop of filament to become under another which then tightens and "locks" the filament, causing a print to fail. Our design works to prevent this.
Our spool stand has rubber feet to stop it from being dragged across your desk, a feeder hole to again prevent spool locking, and slots to hold a lint free cloth for wiping and oiling the filament as it feeds into the machine if desired.
Designed to work with many type of spool up to 70mm wide such as those from Bilby3D, Makerbot and many more.
Teflon Tube - 2mm ID, 4mm OD
This Teflon (PTFE) tube is used to make filament feeder tubes. This tube has a thicker wall (1mm) than the previously supplied tube, so cannot be used to line barrels. They greatly reduce the chance of snagging between your filament spool and the extruder head without causing much drag.
Order by the metre. 1m should be enough for a single extruder machine.
Inner Diameter: 2mm
Outer Diameter: 4mm
Operating Temperature: -190 to 260 degC
Melting Point: 317-327 degC
Deformation Temp: 260 degC
Telfon Tube - 4mm ID, 5mm OD
A more robust Teflon Tube for feeding filament into a Reprap
4mm Inner Diameter
5mm Outer Diameter
Wear, electricity and fire resistant, non-absorbant.
Roller Spool Stand / Holder
This stand holds spools up to 96mm wide (outside of flanges). The spool flanges sit on rollers and rotate as the printer pulls in the filament.
Now includes 1 metre of 2mm Inner Diameter teflon tube and a strip of lint free cloth. If you require tube for 3mm filament, please leave a note when ordering.
PLA Filament - 1.75mm - Black - 1kg spool
Bilby3D PLA filament in pure black
ABS Filament - 1.75mm - Black - 1kg Spool
Like all ABS filament this Bilby3D Black is high gloss, giving a great finish in most machines.
PLA Filament - 1.75mm - White - 1kg Spool
Bilby3D PLA in pure, Bright White (not cream in colour)
ABS Filament - 1.75mm - White - 1kg Spool
This Bilby3D ABS filament is a pure, NOT creamy white.
Flashforge Inventor 1
This 2017 upgrade to the trusty Dreamer adds an onboard camera and greater build height to the twin extruder, heated bed and fully enclosed features
FlashForge Guider - Larger Build Area
The larger machine from FlashForge. PLA (cold bed), Touch Screen, Assisted Leveling, Large Print Area - 250 x 250 x 200mm