This stand holds spools up to 70mm wide (outside of flanges). The spool flanges sit on rollers and rotate as the printer pulls in the filament.
IMPORTANT: there is a wider model. This edition is thin enough to fit in the cavity of some printers, but is only just wide enough for most spools. (
other mode)
FEEDER TUBE SOLD SEPERATELY order here for:
1.75mm,
3mm
The rollers contain roller bearings (608) for low and consistant friction, but is designed to still provide some resistance so your spool does not unravel. This can then cause one loop of filament to become under another which then tightens and "locks" the filament, causing a print to fail. Our design works to prevent this.
Our spool stand has rubber feet to stop it from being dragged across your desk, a feeder hole to again prevent spool locking, and slots to hold a lint free cloth for wiping and oiling the filament as it feeds into the machine if desired.
Designed to work with many type of spool up to 70mm wide such as those from Bilby3D, Makerbot and many more.
Next
Related Products:
Buy Now
Teflon Tube - 2mm ID, 4mm OD
This Teflon (PTFE) tube is used to make filament feeder tubes. This tube has a thicker wall (1mm) than the previously supplied tube, so cannot be used to line barrels. They greatly reduce the chance of snagging between your filament spool and the extruder head without causing much drag.
Order by the metre. 1m should be enough for a single extruder machine.
Inner Diameter: 2mm
Outer Diameter: 4mm
Operating Temperature: -190 to 260 degC
Melting Point: 317-327 degC
Deformation Temp: 260 degC
Elongation: 200-400kg/cm
Buy Now
Telfon Tube - 4mm ID, 5mm OD
A more robust Teflon Tube for feeding filament into a Reprap
4mm Inner Diameter
5mm Outer Diameter
Wear, electricity and fire resistant, non-absorbant.
Buy Now
Roller Spool Stand / Holder
This stand holds spools up to 96mm wide (outside of flanges). The spool flanges sit on rollers and rotate as the printer pulls in the filament.
Now includes 1 metre of 2mm Inner Diameter teflon tube and a strip of lint free cloth. If you require tube for 3mm filament, please leave a note when ordering.
Buy Now
PLA Filament - 1.75mm - Black - 1kg spool
Bilby3D PLA filament in pure black
Buy Now
ABS Filament - 1.75mm - Black - 1kg Spool
Like all ABS filament this Bilby3D Black is high gloss, giving a great finish in most machines.
Buy Now
PLA Filament - 1.75mm - White - 1kg Spool
Bilby3D PLA in pure, Bright White (not cream in colour)
Buy Now
ABS Filament - 1.75mm - White - 1kg Spool
This Bilby3D ABS filament is a pure, NOT creamy white.
Buy Now
FlashForge Finder PLUS 3D Printer
Coming soon - an upgrade to our quietest printer
Buy Now
FlashForge Dreamer - Twin Extruder PLA/ABS 3D Printer
The FlashForge Dreamer has earned its popular reputation as a dependable, high quality machine. You may recognise it as a twin extruder version of the Dremel
Buy Now
FlashForge Finder
The FlashForge Finder has all the convenience of the touchscreen and WiFi from the Dreamer in a compact, low price package PLUS assisted bed levelling.
The print quality and quietness of this machine is impressive, even at this low price!
Buy Now
FlashForge Guider 2 - Released July 2017
We received a pre-release edition to review, and it was the most amazing machine we have ever seen. We have recieved and already sold out our first two shipments, with limited places left on the next; so please do get on the list as soon as possible. Deliveries are every 3-4 weeks.
The build area expands to 28 x 25 x 30cm, it has WiFi, a heated bed, is fully enclosed and prints to 80 micron (although 200 micron on this thing is better than any 100 I have ever seen, so 80 microns is just amazing.
The threaded rods have been switched out for ball screws, and the bed is now aluminum.
Buy Now
FlashForge Finder 2 (aka Inventor 2)
PRE-ORDER Price Only. Stock expected July 2017
This 2017 update to the FlashForge Finder (known for great print quality) enlarges the print area and adds a full enclosure and a door with a smart switch, pausing the print when the door is opened
Buy Now
FlashForge Creator Pro 2016
New Creator Pro 2016 (also known as the Creator 5). It features a steel chassis with a hood, display and navigation buttons, much like the Makerbot Replicator 2x (at less than a third the price).
Buy Now
Flashforge Inventor 1
This 2017 upgrade to the trusty Dreamer adds an onboard camera and greater build height to the twin extruder, heated bed and fully enclosed features
Sydney - Alexandria, NSW
Melbourne - Clayton, VIC
Bilby 3D Technical Support
3D Printer Service and Repair
3D Printing & Prototyping Service
Courses and Training
3D Printing
3D Printer Filament
Brisbane - Spring Hill, QLD
3D Scanners
3D Routers
Parts and Spares
Tools and Jigs
Gifts and Samples
Software
Books and Posters