Prices + Stock updated 23 Oct @ 9:47
This stepper motor is the standard for smaller 3d printers such as the RepRap Wallace and Printrbot machines
Nema 14 motor with 4 wires and a holding torque of 18N.cm (19.8 oz-in or 1.43kgf-cm)
Length 34mm, 35x35mm face, 26x26mm between the holes
Shaft diameter is 5mm, length 24mm (no flat)
Step angle is 1.8 degrees
Next >
More Information
Related Products:
Buy Now
Stepper Motor - Nema 17 - 1.8 degree steps
This stepper motor is the standard for RepRaps and many of their derivatives.
Now includes a flat on the shaft for better grip of pulleys
Buy Now
Stepper Motor - Nema 11
This stepper motor is used in the new universal mini extruder for repraps.
Buy Now
Stepper Motor Driver Module - DM420A
The DM420A is a type of two-phase hybrid stepping motor driver for one motor. It is designed for use with 2-phase hybrid stepper motor of all kinds with 20mm to 36mm outside diameter and less than 2.0A per phase current.
Input Voltage: 12VDC to 36VDC.
Input Power: <2A up to 40W
Output Current: 0.44A - 2.83A(peak)
Inputs and Outputs are opto-isolated.
Overvoltage, under voltage, overcorrect, phase short circuit protection
Operating Temperature: -10 to 45 degreesC
15 channel subdivision and automatic idle-current reduction. 8 channels output phase current setting
Replaces the older MD542 Driver
Copyright 2011-2021 Bilby3D Pty. Ltd.
Sydney - Alexandria, NSW
Perth - Belmont, WA
3D Printers
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
Materials / Filament
3D Scanners
Parts and Spares
Tools & Jigs