Prices + Stock updated 11 May @ 10:12
Endstop Switch board with 3 pins, Set of 3
Switches are rated to 1A at 125V AC
3 pins are marked:
SIG (Signal)
GND (Ground)
VCC (Control Voltage)
Features
Specs
Support
Next
Dimensions: 40x16x9mm
Next
This product is in the categories:
Related Products:
Buy Now
Micro Switch, SPDT, 5A, Lever
These microswitches are great for machine endstops
Buy Now
Micro Switch, SPDT, 5A, Lever Roller
These roller microswitches are great for machine endstops.
They have 3 solder lugs, Normally Closed, Normally Open and Common.
They are 9.5mm between the mounting holes, which take a M2.5 bolt.
9.5mm between the mounting holes, which take a M2.5 bolt.
Max. Voltage: 3A at 250VAC
Max. Current: 5A at 125VDC
Contact Resistance: <= 20mOhms
Insultation Resistance: >=100MOhms
Operational Life: 100,000 cycles
Operational Range: 0.5 - 1.1mm
Operational Tolerance: <= 0.3mm
Operation Pressure: 0.3 - 1.2N
Buy Now
Hall Effect Endstop - 3 pin with 2 magnets
These amazing Hall Effect endstops have no moving parts and yet are the most accurate endstops we have found. Mount one of the supplied magnets on your axis and as it gets close to the endstop it will be triggered at a consistent spot every time.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2019 Bilby3D Pty. Ltd.
Sydney - Alexandria, NSW
Melbourne - Clayton, VIC
3D Printing
3D Printer Filament
Brisbane - Spring Hill, QLD
Bilby 3D Technical Support
3D Printer Service and Repair
Courses and Training
3D Scanners
Parts and Spares
Tools & Jigs