Polyimide / Kapton Tape, 20mm wide.
The roll is approx 30m long and kapton is approx 0.02mm think
Polyimide (also known as Kapton) Tape is a high temperature insulative tape. It uses a silicon based adhesive to withstand high temperatures up to 260 C. It creates a great surface for your build platform - helping to keep your ABS print from moving during printing, but releasing when the item cools. It is great around your extruder head where things get up to 200 degrees C. It can also be used as a general purpose electrical tape with low residue.
Next
More Information
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
Polyimide (Kapton) Tape - 6mm wide - 33m long
This Polyimide (also known as Kapton) Tape is a high temperature insulative tape. It uses a silicon based adhesive to withstand high temperatures up to 260 C. It creates a great surface for your build platform - helping to keep your print from moving during printing, but releasing when the item cools. It is great around your extruder head where things get over 210 C. It can also be used as a general purpose electrical tape. It is anti-static and designed to leave no adhesive residue. The roll is approx 33m long and kapton is approx 0.02mm thick
Buy Now
Polyimide (Kapton) Tape - 100mm wide - 30m long
This Polyimide (also known as Kapton) Tape is extra wide (100mm), great for covering your build platform when printing with ABS. The roll is approx 33m long and kapton is approx 0.02mm think
Buy Now
Polyimide (Kapton) Tape - 50mm wide - 33m long
This Polyimide (also known as Kapton) Tape is great for covering your build platform or providing electrical insultation. ABS stick to this when hot (with a heated bed), but releases easily when cold.
Buy Now
Polyimide (Kapton) Tape - 200mm wide - 33m long
This Polyimide (also known as Kapton) Tape is extra wide (200mm)
The roll is approx 33m long and kapton is approx 0.02mm think
Buy Now
3D printing Tape (Blue Edgelock) - 48mm wide x 50m long
This blue painters (masking) tape is widely accepted as the standard for covering your bed for printing with PLA.
One roll will completely re-cover a Replicator bed over 50 times, or a prusa bed over 43 times.
Genuine 3M Edge-Lock tape
Buy Now
Borosilicate Glass Bed for RepRaps, 200x212
These glass beds make a rugged printing surface. Some people swear by printing directly on to glass with glue stick, but we prefer the results we get when used in conjuction with blue or Kapton (polyimide) tapes.
Now MADE IN SYDNEY
Buy Now
Thermistor, 100K NTC, Axial Leads
Use this for sensing the temperature of your hot end, heated bed or whatever you can think of
Buy Now
Thermistor, 100K NTC type, Radial Leads
Use this for sensing the temperature of your hot end, heated bed or whatever you can think of
Specs:
100kOhm
Tolerance +-10%
Beta Value(K) 4036K
Operating Temperature: -60 to 300 degC
Bead Dia 2.13mm length 4.5mm
Lead Length 67mm
Buy Now
Pre-Cut Ceramic tape with Kapton
Suits the Creator Pro, Dreamer, Guider and Finder machines as well as a wealth of others. It is not self adhesive and you need Kapton tape to seal ends.