This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament. TwinClad XT is a nickel composite coating for very low frction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickel
This is dimensioned the same as our standard nozzle, as used on the Makerbot MK8 extruders.
ALWAYS run preheat before changing nozzles to avoid stripped threads.
Is is compatible with Ultimakers
Hole: 0.4mm hole. Thread: M6, 5mm Long Total Length: 13mm. Head width: 7mm Base: Flat at screw/thread end Tip: may have a slight flatened area Filament Size: suitable for 2.85/3mm filament. Alternative: 1.75mm filament with 2mm Inner Diameter + 3mm outer diameter PTFE tube Coating: TwinClad Coated
Dimensions: 13 x 7 x 7mm
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
CURRENTLY UNAVAILABLE: Due to lack of availability, we have developed our own product: tlNozzleClear. Earliest ETA on this tool is 8/8/2016
These handy little spring wires are the best way we have found yet to unclog a nozzle while it is still in position on the machine - just be careful that filament does not drip down on your fingers when the blockage clears!
Stainless Steel Barrel with TwinCladXT Coating
This tube is an improvement over the stock MakerBot Replicator 1 and MakerBot Replicator 2 thermal barrier tube. Also used on many other types of 3D Printers
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550