This 24-Pin ATX Power Supply provides 500W MAX Power
This power supply goes with a Printrbot Printrboard to give it extra power if required, such as for the heated bed add-on
4x Molex & 2x SATA Power Connectors, 2 x 4-pin (goes with a Printrbot Printrboard Rev D and E to give it extra power if required, such as for a heated bed add-on). 1 x 6-pin PCI (suits Printrbot Printrboard Rev F), 1x4 pin floppy drive connector
80mm ball bearing fan
240V only, input and throughput ports, no power switch
Printrbot Metal Plus Heated bed Upgrade Kit - Until sold out
This is a heated bed upgrade kit for the Printrbot plus. There are only a limited no available.
Printrboard Motherboard for Printrbot Printers
Drop in replacement for the motherboard found on most (pre RasberryPi / OctoPrint) machines. Supplied with the Unified Firmware (Legacy Models), other firmware and instructions, please see the Printrbot website.
Outputs for 4 motors (X,Y,Z, and Extruder), Extruider and Bed Heaters
Inputs for X,Y,Z and E stops
Micro-SD Card slot and Micro-USB slots
This is the latest edition board with a 6 pin power connector. Note Rev D and earlier boardshave a 4 pin power connector and need a jumper cable 4-6 or 8 pin. Available seperately (product code ptPwr4to8pin)
RepRap Electronics Kit
This kit includes all the electronic parts required to build a Prusa or Medel. Just add motors and a power supply and hook up to your hardware
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550