These roller microswitches are great for machine endstops.
They have 3 solder lugs, Normally Closed, Normally Open and Common.
They are 9.5mm between the mounting holes, which take a M2.5 bolt.
9.5mm between the mounting holes, which take a M2.5 bolt.
Max. Voltage: 3A at 250VAC
Max. Current: 5A at 125VDC
Contact Resistance: <= 20mOhms
Insultation Resistance: >=100MOhms
Operational Life: 100,000 cycles
Operational Range: 0.5 - 1.1mm
Operational Tolerance: <= 0.3mm
Operation Pressure: 0.3 - 1.2N
Endstop Switch board with 3 pins, Set of 3
Switches are rated to 1A at 125V AC
3 pins are marked:
VCC (Control Voltage)
Hall Effect Endstop - 3 pin with 2 magnets
These amazing Hall Effect endstops have no moving parts and yet are the most accurate endstops we have found. Mount one of the supplied magnets on your axis and as it gets close to the endstop it will be triggered at a consistent spot every time.
Endstop Switch board with 4 pins
4 pin endstop with cable - individual plugs for the motherboard to work with a variety of different connectors
Cables - Two wire with connector - 70cm
These cables have two wires, red and black, and are terminated to the correct connectors to match the endstop pins on the RAMPS board.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14
Copyright 2016 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.
Bilby 3D Pty. Ltd. Phone 1800-847-333 International +61 2 8197 3928
Australian Distributors of desktop sized 3D printers (FlashForge, Roland, Da Vinci, Repraps, Makerbot & UP printers), 3D Scanners, Tools & Parts
Sydney: 23/110 Bourke Rd, Alexandria, NSW 2015, Australia
Brisbane: 2/474 Upper Edward St, Spring Hill, QLD 4000
Melbourne: Coming to Victoria Feb/Mar 2017
Bega Head Office: 452 Wyndham Lane, Kanoona 2550