This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. It prints easily at 230-245 degrees on a cold bed. We used glue on a glass bed for our test.
0.4mm Nozzle - M6 thread and Wear Resistant Twin Clad coating
This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
PLA Blend Filament - Carbon Fiber - 1.75mm - 500g Spool
This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. It prints easily at 230-245 degrees on a cold bed. We used glue on a glass bed for our test. Tendancy to leave small balls/pimples on surface which easily clean up. Will wear nozzle so we advise using a wear resistant nozzle (sold seperately). Produces impressively strong models with minimum fuss and difficulty.
PLA Blend Filament - 2.85mm - Carbon Fiber - 500g Spool
This amazing filament is a blend of PLA and Carbon Fiber by ProtoPasta in the USA.
It prints easily at 230-245 degrees on a cold bed. We used glue stick on a glass bed for our test.
PLA Blend Filament - 1.75mm - Conductive - 500g Spool
Have you ever wanted to create something with your 3D printer that includes electronics? Maybe an LED, touch sensor, or some other genius invention to solve the worlds problems? Then Proto-pasta Conductive PLA is the perfect material for you! Prints at standard PLA settings on a non-heated bed.
PLA Blend Filament - 1.75mm - Stainless Steel - 500g Spool
Proto-pasta Stainless Steel PLA is a dense material that prints as easily as standard PLA but results in heavy prints that can be finished post-print to achieve amazing results. Perfect for jewelry, costumes, props, figurines, crafting, robots, and more!
In filament form, SSPLA is slightly more brittle than standard PLA, and requires extra care when handling.
Processing is comparable to standard PLA (extrudes at 190-240C). No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines.
PLA Blend Filament - Magnetic Iron - 1.75mm - 500g Spool
This amazing filament is a blend of PLA and carbon Fibre by ProtoPasta in the USA.
Proto-pasta Magnetic Iron PLA - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.
It extrudes at 190-200 degrees c on a cold bed. We have tested on buildtak wit glue stick and it sticks well. Prints best at thicker resolutions like 300 microns, but will look like 100 micron. Our tests showed no spider webbing at all, and models held water after printing. It can lift in unsupported areas, but quickly recovers on the next layer. Sands nicely with very course sandpaper. Can get rust effect by submerging in with salty water for 2-3 hours. In our tests it was not too abrasive on nozzle, but recommend a wear resistant nozzle.