Prices + Stock updated 16 Feb @ 18:38
0.4mm Nozzle - M7 Thread for MK10 Extruders - Wear Resistant Twin Clad Coating
This This wear resistant nozzle by AVN/Micro Swiss suits a range of printers has an M7 thread and 0.4mm hole.
Features
Specs
Support
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament. TwinClad XT is a nickel composite coating for very low frction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickel
This nozzle is used on MK10 extruders. Designed to work with machines with a PTFE tube lined barrel running into the nozzle
ALWAYS run preheat before changing nozzles to avoid stripped threads.
Is is compatible with:
- FlashForge Creator Pro
- FlashForge Creator X
- FlashForge Dreamer
- Flashforge Finder
- Flashforge Guider
- Dremel Idea Builder
- PowerSpec 3D Pro
- PowerSpec 3D X
- Wanhao Duplicator 4S
- Wanhao Duplicator 4X
- Wanhao i3
- Monoprice Maker Select 3D Printer v2
- Cocoon Create 3D Printer
Next
Specs
Hole:0.4mm hole.
Thread:M7, 5mm Long
Total Length:13mm.
Head width: 9mm
Base Flat at screw/thread end
Tipmay have a slight flatened area
Filament Size: suitable for 1.75mm filament.
Is is compatible with the following machines where the MicroSwiss upgrade is fitted and no PTFE lines barrel:
- FlashForge Creator Pro
- FlashForge Creator X
- FlashForge Dreamer
- Flashforge Finder
- Flashforge Guider
- Dremel Idea Builder
- PowerSpec 3D Pro
- PowerSpec 3D X
- Wanhao Duplicator 4S
- Wanhao Duplicator 4X
- Wanhao i3
- Monoprice Maker Select 3D Printer v2
- Cocoon Create 3D Printer
Dimensions: 12 x 8 x 8mm
Next
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
0.2mm Nozzle - M7 Thread for MK10 Extruder - Twin Clad Coated
This This wear resistant nozzle by AVN/Micro Swiss suits a range of printers with 1.75mm filament. It has an M7 thread and 0.2mm hole.
Buy Now
0.6mm Nozzle - M7 Thread for MK10 Extruder - TwinClad Coating
This wear resistant nozzle by AVN/Micro Swiss suits a range of printers with an M7 thread and 0.6mm hole
Buy Now
Nozzle Clearing Tool
This hand held tool is a safer way to clear blockages in your nozzle
Buy Now
Flashforge Inventor 1
This 2017 upgrade to the trusty Dreamer adds an onboard camera and greater build height to the twin extruder, heated bed and fully enclosed features
Buy Now
Teflon tube for Flashforge Single Extruder Barrel
This short piece of Teflon tubing is for lining the barrel on the Flashforge Guider, Guider2, Finder, Finder Plus and Inventor 2
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $14