2018 Models Preview

- Large Format 3D Printers

The Raise 3D N Series of 3D Printers are one serious offering

• High quality printing with layer heights down to 10 microns! or up to 400microns (0.4mm) for speed
• A large 7 inch tablet style interface - bright, easy to use and responsive
• A large build volume across the range
• Wifi Networking - Control and monitor your printer remotely. Also Ethernet, SD Card, USB cable and stick interfaces
• Powerful slicing software called ideaMaker (for PC, Mac and Linux) with inbuilt model repair and print monitoring
• All metal hotend designed for 170-300°C to suit the widest range of materials
• Print Speeds ranging from 10-150mm/s
• Resume prints after a power interruption (power outage, etc.) - no more

Genuine Resellers Welcome - apply now

2018 Models - Pro2 and N2s

Raise is now changing over to 2018 Model 3D Printers
Dual Extruder models are now under the Pro 2 name, due in May 2018
Single Extruder printers are coming later under the N2-S moniker

New Features:
• Dual Extruder machines now lift the unused nozzle clear of the print
• Integrated WebCam for remote monitoring
• Extraction Fan with HEPA filter
• New Extruder design with filament sensing and sprung lever arms
• Thick Removable Aluminium Build Plate with new Z-offset adjuster
• New electronics with 256 microstepping for precision and even lower operating noise
• Optical endstops for precision and durability
• Improved nozzle cooling duct - for better overhangs and bridging

Buy Now

$10,950

Qty

Raise 3D Pro2 Plus, Dual Extruder Extended Height

PRE ORDER ONLY: Available June 2018

The Pro2+ is the new model of the Raise3D N2+ and features some significant improvements

Mechanism to lift the unused nozzle away from the print (reduction in the build height of 5mm t oaccomodate this)
Integrated filament sensor
0.781 micron accuracy in the X, Y znd Z axis
New mainboard with 256 microstepping for smoother, quieter operation
HEPA Filter to reduce particle emissions when printing
4x Torque to the filament drive
Onboard Camera for remote monitoring
Optical Endstops
Extensively tested with TPU (Flex) with a 95A shore hardness

Pro2 Plus - Dual Extruder Pre-Order

Big and Featured

• Huge Build Volume: 305 x 305 x 605mm (280 x 305 x 605 when printing with both nozzles)
• Dual Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Factory Levelled Bed - bolted down flat so you don't need to adjust
More Info
• Easily resume your print if power is lost
• Robust Leadscrews and Aluminium frame
• Webcam for remote monitoring
• HEPA Filter cleans the air as it is extracted
• Fully enclosed with clear panels and hood for great visibility

Buy Now

$7,595

Qty

Raise 3D Pro2, Dual Extruder

PRE ORDER ONLY: Available April-May 2018

The Pro2 is the new model of the Raise3D N2 and features some significant improvements

Mechanism to lift the unused nozzle away from the print (reduction in the build height of 5mm t oaccomodate this)
Integrated filament sensor
0.781 micron accuracy in the X, Y znd Z axis
New mainboard with 256 microstepping for smoother, quieter operation
HEPA Filter to reduce particle emissions when printing
4x Torque to the filament drive
Onboard Camera for remote monitoring
Optical Endstops
Extensively tested with TPU (Flex) with a 95A shore hardness

Pro2 - Dual Extruder Pre-Order

Big and Featured

• Huge Build Volume: 305 x 305 x 300mm (280 x 305 x 300 when printing with both nozzles)
• Dual Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Factory Levelled Bed - bolted down flat so you don't need to adjust
More Info
• Easily resume your print if power is lost
• Robust Leadscrews and Aluminium frame
• Webcam for remote monitoring
• HEPA Filter cleans the air as it is extracted
• Fully enclosed with clear panels and hood for great visibility

Buy Now

$6,500

Qty

Raise 3D N2plus, Dual Extruder

Large print volume, bright 7inch tablet like interface with USB, SD card, Ethernet and WiFi networking make this a great machine

This model has a heated bed and twin nozzle extruder as well!

NOTE: Due to the large size of this machine, FREE FREIGHT DOES NOT APPLY TO THIS ITEM. See Features tab for details

N2 Plus - Dual Extruder Limited Stock Remains

Big and Featured

• Huge Build Volume: 305 x 305 x 610mm (280 x 305 x 610 when printing with both nozzles)
• Dual Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Factory Levelled Bed - bolted down flat so you don't need to adjust
More Info
• Easily resume your print if power is lost
• Robust Leadscrews and Aluminium frame
• Fully enclosed with clear panels and hood for great visibility

Buy Now

$6,300

Qty

Raise 3D N2plus, Single Extruder

Large print volume, bright 7inch tablet like interface with USB, SD card, Ethernet and WiFi networking make this a great machine

NOTE: Due to the large size of this machine, FREE FREIGHT DOES NOT APPLY TO THIS ITEM. see Features section for details

N2 Plus - Single Extruder Limited Stock Remains

Big and Featured

• Huge Build Volume: 305 x 305 x 610mm
• Single Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Factory Levelled Bed - bolted down flat so you don't need to adjust
More Info
• Easily resume your print if power is lost
• Robust Leadscrews and Aluminium frame
• Fully enclosed with clear panels and hood for great visibility

Buy Now

$4,875

Qty

Raise 3D N2, Dual Extruder - SOLD OUT

Large print volume, bright 7inch tablet like interface with USB, SD card, Ethernet and WiFi networking make this a great machine

This model has a heated bed and twin nozzle extruder as well!

N2 - Dual Extruder Sold Out - See Pro2

Big and Featured

• Huge Build Volume: 305 x 305 x 305mm (280 x 305 x 305 when printing with both nozzles)
• Dual Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Factory Levelled Bed - bolted down flat so you don't need to adjust
More Info
• Easily resume your print if power is lost
• Robust Leadscrews and Aluminium frame
• Fully enclosed with clear panels and hood for great visibility

Buy Now

$4,575

Qty

Raise 3D N2, Single Extruder- SOLD OUT NO MORE COMING

Large print volume of 305mm cubed, bright 7inch tablet like interface with USB, SD card, Ethernet and WiFi networking make this a great machine

N2 - Single Extruder Sold Out & Superseded

Big and Featured

• Huge Build Volume: 305 x 305 x 305mm
• Single Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Factory Leveled Bed - bolted down flat so you don't need to adjust
More Info
• Easily resume your print if power is lost
• Robust Leadscrews and Aluminium frame
• Fully enclosed with clear panels and hood for great visibility

Buy Now

$3,785

Qty

Raise 3D N1, Dual Extruder

This entry model is only available UNTIL SOLD OUT

Large print volume, bright 7inch tablet like interface with USB, SD card, Ethernet and WiFi networking make this a great machine

This model has a heated bed and twin nozzle extruder as well!

N1 - Dual Extruder Limited Stock Remains

The smallest, but still generously sized

• Build Volume: 205 x 205 x 205mm (180 x 205 x 205 when printing with both nozzles)
• Dual Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Removable Glass Bed
• 7 inch Tablet Interface
More Info
• Robust Aluminium frame with clear panels and hood for great visibility

Buy Now

$3,585

Qty

Raise 3D N1, Single Extruder

This entry model is only available UNTIL SOLD OUT

Bright 7inch tablet like interface with USB, SD card, Ethernet and WiFi networking make this a great machine

N1 - Single Extruder Limited Stock Remains

The smallest, but still generously sized

• Build Volume: 205 x 205 x 205mm
• Single Extruder + Heated bed. Prints in PLA, ABS, PET-G, Nylon and more
• Removable Glass Bed
• 7 inch Tablet Interface
More Info
• Robust Aluminium frame with clear panels and hood for great visibility

Raise Reviews

More Raise Reviews

About IdeaMaker Software

IdeaMaker is a powerful and fully-featured piece of software.
Import your model and simply print, or have access to a vast array of different printing parameters in advanced mode.

Native-compiled, multi-threaded, 64-bit, highly efficient slicing engine for faster slicing speed
Automates separating of parts in assemblies
Comprehensive repair features for fixing bad models
Automatically generates support structures - Manual add, remove and edit of supports is also available

Manages multiple printing profiles to easily switch between different print settings
View cross-section of models
Auto-Layout of multiple parts
User-friendly interface that is very easy to use, only 4 clicks to make a print

Compatible with most FDM 3d printers
Input OBJ/STL, output GCODE

Copyright 2018 Bilby3D. "Bilby3D" and the Bilby Logo are registered Trademarks of Bilby Publishing, used with Permission.